User's Manual

RFDS Set–up and Calibration

68P09258A31–A

Oct 2003

1X SCt 4812T BTS Optimization/ATP

3-108

Program TSU NAM

The NAM must be programmed before it can receive and process test

calls, or be used for any type of RFDS test.

Prerequisites

Ensure the following prerequisites have been met before proceeding:

S MGLI is INS.

S TSU is powered up and has a code load.

Program NAM Procedure

Follow the procedure in Table 3-49 to program the TSU NAM.

Table 3-49: Program the TSU NAM

Step Action

1 Select the RFDS tab.

2 Select the SUA (Cobra RFDS) or TSU (GLI based RFDS).

3 Click on TSU in the BTS menu bar, and select Program TSU NAM from the pull–down menu. A

NAM programming window will appear.

4 Enter the appropriate information in the boxes (see Table 3-43 and Table 3-44).

5 Click on the OK button to display the status report.

6 Click on the OK button to close the status report window.