User Manual

Required Test Equipment and Software
1-14 1X SC4812T–MC BTS Optimization/ATP 5/21/04
DRAFT
Overview
Test equipment and software described in this section is required for the
optimization and acceptance testing procedures. Common tools such as
screwdrivers and frame keys are also needed. Read the operators manual
for all test equipment items to understand their individual operation
before using them for optimization or acceptance testing.
LMF Computer and Software
LMF Hardware Requirements
An LMF computer platform that meets the following requirements (or
better) is recommended:
S Notebook computer
S 266 MHz (32–bit CPU) Pentium processor
S Windows 98 Second Edition (SE) or Windows 2000 operating system
S 4 GB internal hard disk drive
S SVGA 12.1–inch active matrix color display with 1024 x 768
(recommended) or 800 x 600 pixel resolution and capability to display
more than 265 colors
NOTE
If 800 x 600 pixel resolution is used, the LMF window must be
maximized after it is displayed.
S Memory requirements:
Minimum required RAM: 96 MB
Recommended RAM:
–– 128 MB for Windows 98 SE
–– 256 MB for Windows 2000
S 20X CD ROM drive
S 3 1/2 inch floppy drive
S 56kbps V.90 modem
S Serial port (COM 1)
S Parallel port (LPT 1)
S PCMCIA Ethernet interface card (for example, 3COM Etherlink III)
with a 10Base–T–to–coax adapter
1