User Manual

Using the LMF – continued

5/21/04 1X SC4812T–MC BTS Optimization/ATP 3-29

DRAFT

Table 3-10: Establishing MMI Communication

Step Action

2c – ,Click the Disconnect Port button on the Serial Connection tab.

Start the named HyperTerminal connection for MMI sessions by double clicking on its Windows

desktop shortcut.

NOTE

If a Windows desktop shortcut was not created for the MMI connection, access the connection from the

Windows Start menu by selecting:

Programs > Accessories > Hyperterminal > HyperTerminal > <Named HyperTerminal

Connection (e.g., MMI Session)>

4 Once the connection window opens, establish MMI communication with the BTS FRU by pressing

the LMF computer Enter key until the prompt identified in the applicable procedure is obtained.

Figure 3-8:CDMA LMF Computer Common MMI Connections – Cable CGDSMMICABLE219112 or

Fabricated MMI Cable

CABLE PART NUMBEr

CGDSMMICABLE219112

FABRICATED MMI CABLE

(SEE APPENDIX J)

DB–9

CONNECTOR

8–PIN

LMF COMPUTER

To FRU MMI

Connector

COM1

COM2