User Manual

Recovery from BTS Router Boot to ROMmon – continued
5/21/04 1X SC4812T–MC BTS Optimization/ATP I-69
DRAFT
Table I-11: Extended Recovery from BTS Router ROMmon Boot
Step Action
9 At the user EXEC mode prompt, enter the following to access the privileged EXEC mode:
enable
A response similar to the following will be displayed:
Router> enable
Router#
10 Remove the additional CF memory card from the BTS router following the procedure in Table I-13.
11 Install the original CF memory card in the router following the procedure in Table I-14.
12 Format the original CF memory card by entering the following:
format slot0:
A response similar to the following will be displayed:
Router#format slot0:
Format operation may take a while. Continue? [confirm]
13 Press the Enter key to continue the format operation.
A response similar to the following will be displayed:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in ”slot0:”. Continue? [confirm]
. . . continued on next page
I