User Manual

Recovery from BTS Router Boot to ROMmon – continued

5/21/04 1X SC4812T–MC BTS Optimization/ATP I-59

DRAFT

Table I-10: Simple Recovery from BTS Router ROMmon Boot

Step Action

If the configuration register is set properly and/or the router does not reboot with the IOS, enter the

following at the

rommon # > prompt to identify the IOS file on the CF memory card:

dir slot0:

A response similar to the following will be displayed:

rommon 1 > dir slot0:

program load complete, entry point: 0x80008000, size: 0xb2a0

Directory of slot0:

2 2212 –rw– canned–config

3 7051976 –rw– mwr1900–i–mz.122–8.MC2b.bin

4 614306 –rw– MWR1900_RM2.srec.122–8r.MC3.bin

rommon 2 >

NOTE

The IOS filename will be similar to the following:

mwr1900–i–mz.122–8.MC2b.bin

7 If there is no IOS file on the CF memory card, proceed to Table I-11 and perform the extended

recovery procedure.

. . . continued on next page