User Manual

Recovery from BTS Router Boot to ROMmon – continued
I-58 1X SC4812T–MC BTS Optimization/ATP 5/21/04
DRAFT
Table I-10: Simple Recovery from BTS Router ROMmon Boot
Step Action
4b Enter the following at the rommon prompt:
confreg 0x2102
A response similar to the following will be displayed:
rommon 3 > confreg 0x2102
You must reset or power cycle for new config to take effect
rommon 4 >
4c Enter the following at the rommon prompt:
reset
A response which begins and ends similar to the following will be displayed:
rommon 4 > reset
System Bootstrap, Version 12.2(20020113:235343) [sbose–wilma 109], DE-
VELOPMENT SOFTWARE
Copyright (c) 1994–2002 by cisco Systems, Inc.
mwr1900 processor with 131072 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
Readonly ROMMON initialized
.
...<output omitted>...
.
Press RETURN to get started!
5 If the router reboots with the IOS, skip to step 21.
. . . continued on next page
I