User Manual

Verify and Upgrade ROMmon Version – continued

5/21/04 1X SC4812T–MC BTS Optimization/ATP I-53

DRAFT

Table I-9: Verify and Upgrade/Replace Installed ROMmon Version Using a tftp Server

Step Action

16 Display the CF memory card directory to verify that the new ROMmon version file is there by

entering the following:

dir

A response similar to the following will be displayed:

BTSRTR1#dir

Directory of slot0:/

1 –rw– 7051976 Sep 23 2002 07:25:36 mwr1900–i–mz.122–8.MC2b.bin

2 –rw– 2212 Mar 01 1993 00:09:06 canned–config

3 –rw– 614306 Dec 13 2002 14:59:36

MWR1900_RM2.srec.122–8r.MC3.bin

31932416 bytes total (24263922 bytes free)

BTSRTR1#

17 Replace the existing ROMmon version with the new one copied to the CF memory card by entering

the following:

upgrade rom–monitor file slot0:MWR1900_RM2.srec.122–8r.MC3

A response similar to the following will be displayed:

BTSRTR1#This command will reload the router. Continue?[yes/no]

18 When prompted to continue, enter yes and press the Enter key.

A response similar to the following will be displayed:

BTSRTR1#This command will reload the router. Continue?[yes/no] yes

ROMMON image upgrade in progress

Erasing boot flash

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Programming boot flash pppp

Now reloading

19 When the router has completed initialization, change to the router privileged EXEC mode by entering

the following:

enable

A response similar to the following will be displayed:

BTSRTR1>enable

BTSRTR1#

. . . continued on next page