User Manual

Verify and Upgrade ROMmon Version – continued

5/21/04 1X SC4812T–MC BTS Optimization/ATP I-51

DRAFT

Table I-9: Verify and Upgrade/Replace Installed ROMmon Version Using a tftp Server

Step Action

9 If the default filename displayed in the prompt is correct, press the Enter key to accept it. If it is

missing or not correct, enter the correct filename.

A response similar to the following will be displayed:

Destination filename [startup–config]?

[OK – 2212/4096 bytes]

2212 bytes copied in 0.152 secs

BTSRTR1#

NOTE

The IOS defaults to the CF memory card (slot0:) directory unless the present working directory has

been changed using the

cd command. Determine the present working directory by entering pwd. If

the present working directory has been changed, enter the command

cd slot0: to return to the default

setting.

Determine the amount of memory available (bytes free) on the CF memory card by entering the

following:

dir

A response similar to the following will be displayed:

BTSRTR1#dir

Directory of slot0:/

1 –rw– 7051976 Sep 23 2002 07:24:18

mwr1900–i–mz.122–8.MC2b.bin

2 –rw– 2212 Mar 01 1993 00:14:48 canned–config

31932416 bytes total (24885606 bytes free)

Router#

Be sure there is at least 1 MB (1048580) of free memory.

NOTE

A ROMmon version file requires approximately 0.7 MB.

. . . continued on next page