User Manual

Change or Upgrade BTS Router IOS Version – continued
5/21/04 1X SC4812T–MC BTS Optimization/ATP I-35
DRAFT
– Cisco tftp server
– PumpKIN tftp server
– Any other equivalent tftp server application
S A copy of the MWR 1900 or MWR 1941 router IOS version required
for the network where the routers are to be installed
Contact the network administrator or the Motorola Account
Team for assistance in determining and obtaining a copy of
the required IOS version.
NOTE
MWR 1941 routers must be loaded with IOS version
mwr1900–i–mz.122–8.MC2d.bin or later. This router
model will not function properly with earlier IOS versions.
IMPORTANT
*
Required Publications
The following publication is required to perform procedures in this
section:
S MWR1900 Wireless Mobile Edge Router Software Configuration
Guide; part number 78–13983–01
Upgrade/Replace Installed IOS
Version and Verify File
Sequence Position
Description – This procedure covers using an LMF computer equipped
with a tftp server application to perform the following activities:
1. Verify the IOS version loaded on a CF memory card and running on
a BTS router
2. Upgrade or replace the IOS version installed in a BTS router
3. Ensure the IOS file is the first file on the CF memory card
Prerequisites – The following are required prior to performing this
procedure:
S The LMF computer and BTS router have been prepared for tftp file
transfer and are operating as they would be after performing the
procedures in Table I-4, Table I-5, Table I-6, and steps 1 through 8 of
Table I-7
S A copy of the required IOS version is loaded into the tftp default
directory of the LMF computer
Upgrading/replacing installed IOS version and verifying file
sequence position – Follow the procedure in Table I-8 to replace or
I