User Manual

Verify IOS Version and Install Canned Configuration – continued

5/21/04 1X SC4812T–MC BTS Optimization/ATP I-33

DRAFT

Table I-7: Transfer Canned Configuration Files to the BTS Router Using a TFTP Server

Step Action

26a – Disconnect the cabling from the BTS router.

26b – Remove power from the router and disconnect it from the power supply.

26c – Repeat the procedures in Table I-5, Table I-6, and this table (Table I-7) using the additional router.

27 If no additional routers must be configured, perform steps 26a and 26b.

28 On the LMF computer, shut down the tftp server application and exit the HyperTerminal session.

If no additional tftp transfer activities will be performed, change the NIC IP address and subnet mask

back to those for LMF–BTS communication recorded in Table I-4, step 10b.

! CAUTION

If the BTS 10base–2 LAN IP address and subnet mask for the LMF computer’s NIC are not restored,

the LMF can not log into a BTS when attempting to perform a BTS optimization or ATP.