User Manual

Preparing the LMF – continued

3-10 1X SC4812T–MC BTS Optimization/ATP 5/21/04

DRAFT

Table 3-2: Copying CBSC CDF or NEC Files to the LMF

n Step Action

AT THE CBSC:

1 Login to the CBSC workstation.

2 Insert a DOS formatted diskette in the workstation drive.

3 Type eject –q and press the <Enter> key.

4 Type mount and press the <Enter> key.

NOTE

S Look for the “floppy/no_name” message on the last line displayed.

S If the eject command was previously entered, floppy/no_name will be appended with a

number. Use the explicit floppy/no_name reference displayed when performing step 7.

5 Change to the directory containing the file by typing cd <directory name> (ex. cd

bts–248) and pressing <Enter>.

6 Type ls <Enter> to display the list of files in the directory.

7 With Solaris versions of Unix, create DOS–formatted versions of the bts–#.cdf and cbsc–#.cdf or

NECB*bts#.xml and NECJ*bts#.xml files on the diskette by entering the following command:

unix2dos <source filename> /floppy/no_name/<target filename>

For example, unix2dos bts–248.cdf

or NECB–2.16.4.41–bts248.xml /floppy/

no_name/bts–248.cdf.

NOTE

S Other versions of Unix do not support the unix2dos and dos2unix commands. In these cases,

use the Unix cp (copy) command. The copied files will be difficult to read with a DOS or

Windows text editor because Unix files do not contain line feed characters. Editing copied CDF

or NEC files on the LMF computer is, therefore, not recommended.

S Using cp, multiple files can be copied in one operation by separating each filename to be copied

with a space and ensuring the destination directory (floppy/no_name) is listed at the end of the

command string following a space (for example,

cp bts–248.cdf cbsc–6.cdf /floppy/no_name).

8 Repeat steps 5 through 7 for each bts–# that must be supported by the LMF.

9 When all required files have been copied to the diskette, type eject and press the <Enter> key.

10 Remove the diskette from the CBSC.

AT THE LMF:

11 Start the Windows operating system.

12 Insert the diskette into the LMF.

. . . continued on next page