User Manual

ManualsBrandsNokia Solutions and Networks ManualsElectronicsSC4812T-MC 1X/1X-DO @ 1.9GHz

301

302

303

304

305

306

307

308

309

310

Download Canned Configuration Files from the OMC–R – continued

5/21/04 1X SC4812T–MC BTS Optimization/ATP I-13

DRAFT

Table I-3: BTS Router Canned Configuration File FTP Transfer from the OMC–R

Step Action

14b – Enter the following to download the second BTS router canned configuration file:

get btsrtr_canned.red

A response similar to the following will be displayed:

ftp> get btsrtr_canned.red

200 PORT command successful.

150 Binary data connection for btsrtr_canned.red (10.182.29.117,80) (2223

bytes).

226 Binary Transfer complete.

ftp: 2223 bytes received in 0.59Seconds 3.76Kbytes/sec.

ftp>

15 Before terminating the FTP session, open Windows Explorer and view the contents of the directory

where the canned configuration files are to be stored to be sure the files are present. Perform the

following:

15a – Click Start > Programs > Windows Explorer.

15b – In the left–hand pane of Windows Explorer, perform one of the following depending on the LMF

computer operating system:

–– Win98 SE: If necessary, expand the directory display for the drive where the canned configu-

ration file storage directory is located by clicking on the + next to the drive icon.

–– Win2K: Expand the user profile and directory display for the drive where the canned configu-

ration file storage directory is located by clicking on the + next to each icon, respectively.

15c – Expand any sub–directories as required to display the directory folder where the canned

configuration files are to be stored.

15d – Click on the directory folder icon where the canned configuration files are to be stored.

15e – In the right–hand pane, verify that the files btsrtr_canned.blue and btsrtr_canned.red

appear.

15f – If the files appear, proceed to step 16.

15g – If the files do not appear, repeat step 14, its sub–steps, step 15 and its sub–steps.

16 Close Windows Explorer, and, in the command line window, enter the following to terminate the FTP

session:

bye

A response similar to the following will be displayed:

ftp> bye

221 Goodbye.

C:\Can_Cfg>

. . . continued on next page