User Manual

Download Canned Configuration Files from the OMC–R – continued

5/21/04 1X SC4812T–MC BTS Optimization/ATP I-9

DRAFT

Table I-3: BTS Router Canned Configuration File FTP Transfer from the OMC–R

Step Action

1 If it has not been done, create a directory on the LMF computer where the BTS router canned

configuration files will be stored.

2 If it has not been done, obtain the OMC–R logon user ID and password from the local network

administrator.

3 Connect the LMF computer to the local network and log on.

NOTE

This procedure uses the command line FTP client supplied with Windows 98, Second Edition (Win98

SE) and Windows 2000 (Win2K); however, any commercially available FTP client application can be

used. Follow the manufacturer’s instructions for operation of an alternative application.

Open a command line (MS DOS) window by clicking on Start > Programs > Command Prompt.

5 When the command line window opens, change to the directory where the canned configuration files

will be stored on the LMF computer by entering:

cd pathname

Where pathname = the path to the required directory

A response similar to the following will be displayed:

C:\> cd Can_Cfg

C:\Can_Cfg>

6 Check the contents of the directory by entering the following:

dir

A response similar to the following will be displayed:

C:\Can_Cfg>dir

Volume in drive C is MAIN

Volume Serial Number is F2AA–1721

Directory of C:\Can_Cfg>

08/22/2002 03:46p <DIR> .

08/22/2002 03:46p <DIR> ..

08/22/2002 03:46p 2,223 btsrtr_canned.blue

08/22/2002 03:47p 2,223 btsrtr_canned.red

2 File(s) 4,644 bytes

2 Dir(s) 2,556,045,312 bytes free

C:\Can_Cfg>

. . . continued on next page