User Manual

BTS Router Initial Configuration

5/21/04 1X SC4812T–MC BTS Optimization/ATP I-1

DRAFT

Overview

This appendix contains information and operations related to loading an

MWR 1900 or MWR 1941 BTS router with the minimum standard

(canned) configuration necessary for network communications. Once the

router is communicating on the network, the full, site–specific,

operational configuration can be downloaded to the router over the

network. This appendix includes sections on:

S Setting up communications with a router using a Microsoftr

Windowsr–based computer

S Downloading BTS router canned configuration files from the OMC–R

S Transferring the canned configuration files from the Windows–based

computer to the BTS router

S Verifying and replacing/upgrading the IOS version loaded on the CF

memory card

S Verifying and, if necessary, replacing/upgrading the ROM monitor

low–level operating system version loaded in the BTS router

S Recovery from BTS router initialization with the ROM monitor

low–level operating system and troubleshooting to locate and correct

the cause

S Changing the router FE interface IP addresses

S Sample listings of the BTS router canned configuration files