User Manual

Preparing the LMF – continued

3-8 1X SC4812T–MC BTS Optimization/ATP 5/21/04

DRAFT

The naming convention for the LIF is:

NE_LIF.xml

The LIF must reside in the <LMF_HOME>\cdma\loads\<Software

Release Number> directory, where <LMF_HOME> = the home

directory in which the LMF is installed, usually C:\wlmf <Software

Release Number> = the System Software Release Number (e.g.

2.16.1.0.10).

Cal File

The Cal File still resides in the <LMF_HOME>\cdma\bts–# directory

and is named

bts–#.cal, where # is the actual integer number of the

BTS.

LMF Operating System

Installation

This section provides information and instructions for installing and

updating the LMF software and files.

NOTE

First Time Installation Sequence:

1. Install Java Runtime Environment (JRE)

2. Install U/WIN K–shell emulator

3. Install LMF application programs

4. Install/create BTS folders

NOTE

Any time U/WIN is installed, the LMF application software

must also be installed. This is because the LMF application

installation modifies some of the files that are installed during

the U/Win installation. These modifications are necessary for

proper LMF operation. Installing U/Win over–writes these

modifications.

There are multiple binary image packages for installation on the

CD–ROM. When prompted, choose the load that corresponds to

the software release currently installed in the network. Perform

the Device Images installation after the LMF installation.

If applicable, a separate CD ROM of BTS Binaries may be

available for binary updates.

Follow the procedure in Table 3-1 to install the LMF application

program using the LMF CD ROM.

Table 3-1: LMF Application Program Installation

n Step Action

1 Insert the LMF Program CD ROM into the LMF CD

ROM drive.

1a – If the Setup screen appears, follow the instructions

displayed on the screen.

. . . continued on next page