User Manual

Verifying and Setting GPIB Addresses – continued
F-20 1X SC4812T–MC BTS Optimization/ATP 5/21/04
DRAFT
Table F-15: Procedure for Calibrating Test Cable Setup Using Advantest R3465
Step Action
19 Calculate the total test setup loss by adding up all the individual losses:
Example: Total test setup loss = 0.5 + 1.4 + 20.1 + 29.8 = 51.8 dB
This calculated value will be used in the next series of tests.
20 Press the FREQ key in the ENTRY area.
21 Using the keypad entry keys, set the test frequency to the RX frequency.
22 Repeat steps 9 through 19 for the RX frequency.
23 Refer to Table 3-30 for assistance in manually setting the cable loss values into the LMF.
F