User Manual

Verifying and Setting GPIB Addresses – continued
5/21/04 1X SC4812T–MC BTS Optimization/ATP F-13
DRAFT
S Motorola CyberTAME software program “TAME”.
S Parallel printer port cable (shipped with CyberTest).
This procedure assumes that the test equipment is set up
and ready for testing.
NOTE
Table F-10: Verify and/or Change Motorola CyberTest GPIB
A
Step Action
1 On the LMF desktop, locate the CyberTAME icon. Double click on the ico
n
application.
2 In the CyberTAME window taskbar, under Special, select IEEE.488.2.
3 CyberTAME software will query the CyberTest Analyzer for its current GP
I
open the IEEE 488.2 dialog box. If the current GPIB address is not 18, perf
o
procedure to change it:
– Use the up or down increment arrows, or double–click in the field and t
y
– Click on the OK button.
The new address will be written to the CyberTest via the parallel port a
n
NOTE
Verify that the address has been set by repeating steps 2 and 3. The new add
r
the IEEE 488.2 dialog box Address field.
HP437 Power Meter GPIB
Address
Follow the steps in Table F-11 and refer to Figure F-10 to verify and, if
necessary, change the HP437 GPIB address.
Figure F-10: HP437 Power Meter
ENTER
PRESET
SHIFT (BLUE) PUSHBUTTON –
ACCESSES FUNCTION AND
DATA ENTRY KEYS IDENTIFIED
WITH LIGHT BLUE TEXT ON
THE FRONT PANEL ABOVE
THE BUTTONS
FW00308REF
NOTE
This procedure assumes that the test equipment is set up and
ready for testing.
F