User Manual

Updating Calibration Data Files

5/21/04 1X SC4812T–MC BTS Optimization/ATP 5-1

DRAFT

Software Release caveats

Software Release R2.16.4.1 allows the user to load the calibration file

from the LMF directly onto the MGLI. The MGLI will then ftp the new

calibration file to the OMC–R, thereby eliminating the need for the user

to place the calibration file at the OMC–R.

Copy and Load Cal File to to

CBSC

Updated calibration (CAL) file information must be moved from the

LMF Windows environment back to the CBSC, which resides in a Unix

environment. The procedures that follow detail how to move files from

one environment to the other.

Backup CAL Data to a Diskette

The BLO calibration files should be backed up to a diskette (per BTS).

Follow the procedure in Table 5-1 to copy CAL files from a CDMA

LMF computer to a diskette.

Table 5-1: Backup CAL Data to a Diskette

Step Action

1 With Windows running on the LMF computer, insert a disk

into Drive A:\.

2 Launch the Windows Explorer application program from the

Start > Programs menu list.

3 Select the applicable <x>:\<lmf home directory/cdma/bts–#

folder.

4 Drag the bts–#.cal file to Drive A.

5 Repeat Steps 3 and 4, as required, for other bts–# folders.