User Manual

TX Calibration Audit – continued
5/21/04 1X SC4812T–MC BTS Optimization/ATP 3-91
DRAFT
Motorola does not encourage the user to edit the CAL file
as this action can cause interface problems between the
BTS and the LMF. To manually edit the CAL file, the
LMF must first be logged out of the BTS. If the CAL file
is manually edited and then the Create Cal File function is
run, the edited information is lost.
CAUTION
Prerequisites
Before running this procedure, the following should be done:
S LMF is logged into the BTS.
S BBXs are OOS_RAM with BLO downloaded.
Creating a CAL File
Table 3-39: Create CAL File
n Step Action
1 Select the applicable BBXs.
NOTE
The CAL file is only updated for the selected BBXs.
2 Click on the Device menu.
3 Click on the Create Cal File menu item.
A status report window displays the results of the action.
4 Click OK to close the status report window.
3