User Manual

Overview – continued
5/21/04 1X SC4812T–MC BTS Optimization/ATP 2-3
DRAFT
Figure 2-1: Switch Card
ti-CDMA-WP-00039-v01-ildoc-ftw
Switch Card
1234
ON
BTS
MF
3 Sector
6 Sector
J1
J2
J3
J4
J5
SHIELDS
Configuration
Switch
Setting Frame C–CCP Shelf
Configuration Switch
The backplane switch settings behind the fan module nearest the breaker
panel should be set as shown in Figure 2-2.
The switch setting must be verified and set before power is applied to the
BTS equipment.
S Starter Frame – all dip switches set to ON (UP)
S Expansion Frame – all dip switches ON (UP) except
MODEM_FRAME_ID_0 OFF (DOWN)
2