Manualshelf

User's Manual

ManualsBrandsNokia Solutions and Networks ManualsElectronicsSC300 1X Microcell @ 1.9 GHz
111112113114115116117118119120
Installation Completion Checklist – continued
JAN 2002
6-45
SC300 1X BTS Hardware Installation, ATP, and FRU Procedures
DRAFT
Table 6-35: Installation Completion Checklist
Status NotesItemNo.
32 The DC output cable is securely attached to
the DC output connector (if applicable).
33 The unit–to–unit SU cabling is secure (if
applicable).
34 The unit–to–unit MIB cabling is secure (if
applicable)
35 The antenna N–type connectors are securely
attached to the antenna A and B connectors.
36 All unused ports are properly terminated.
37 All cables are dressed and tied.
38 The external power source (AC or DC) is
active.
39 The AC and/or DC power breakers on the
BTS are engaged (pushed in).
40 The front solar cover is secure (if applicable).
41 The auxiliary device is switched on (if
applicable).
42 The site is cleaned, swept and trash removed.
43 The site specific documentation is present at
the site.
6