User's Manual

Subscriber Unit (SU) Test and Setup – continued

DRAFT

SC300 1X BTS Hardware Installation, ATP, and FRU Procedures

JAN 2002

7-72

Table 7-42: Procedure to Program the SU NAM Parameters

Step Action

6 Enter the following command at the sc300’x–1> prompt to program the System ID:

su nam sid <system ID>

7 Enter the following command at the sc300’x–1> prompt to program the Mobile Country Code

(MCC) and IMSI 11&12 (MNC) code:

su nam imsi <mcc & IMSI>

For example, if the MCC code is “11” and the MNC code is “23,” you would enter:

su nam imsi 1123

8 Enter the following command at the sc300’x–1> prompt to view the changes to the NAM

table:

su nam show

9 Enter the following command at the sc300’x–1> prompt to download the NAM information

into the mobile:

su nam update

Downloading the NAM parameters into the Mobile may take a few minutes.