User's Manual

GPIB Addresses – continued

JAN 2002

7-41

SC300 1X BTS Hardware Installation, ATP, and FRU Procedures

DRAFT

MENU ENTER

ARROW

KEYS

Figure 7-18: Gigatronics 8541C Power Meter Detail

Verify and Set Motorola

CyberTest GPIB Address

Follow the steps in Table 7-22 to verify and, if necessary, change the

GPIB address on the Motorola CyberTest. Changing the GPIB address

requires the following items:

 Motorola CyberTest communications analyzer.

 Computer running Windows 3.1/Windows 95.

 Motorola CyberTAME software program “TAME”.

 Parallel printer port cable (shipped with CyberTest).

Table 7-22: Verify and/or Change Motorola CyberTest GPIB Address

Step Action

1 On the LMF desktop, locate the CyberTAME icon. Double click on the icon to run the CyberTAME

application.

2 In the CyberTAME window taskbar, under Special, select IEEE.488.2.

3 CyberTAME software will query the CyberTest Analyzer for its current GPIB address. It will then

open the IEEE 488.2 dialog box. If the current GPIB address is not 18, perform the following steps to

change it:

– Use the up or down increment arrows, or double–click in the field and type the number.

– Click on the OK button. The system will write and save the new address to the CyberTest via the

parallel port.

NOTE

Repeat steps 2 and 3 to verify that the address was set. The new address should now appear in the

IEEE 488.2 dialog box Address field.