Service Manual

GSM-205-423
Interface panel cabling
31st Oct 01
Installation & Configuration: Horizon macro indoor
68P02902W08-B
CONTROLLED INTRODUCTION
Inst. 2–47
Interface panel cabling
Interface panel
diagram and
pinout
overview
All cabinet connectors are located on the interface panel. Each connector is
marked with the appropriate label. Power connectors are also located on the
interface panel.
An extension cabinet fibre optic cable is not connected to the interface panel,
but directly connected to the FMUX digital module in the CBIA cage. The fibre
optic cable enters the cabinet through a hole on the top panel in front of the
interface panel.
Figure 2-36 shows the locations of all the interface panel connectors.
ig.239.rh
T43/BIB
AC POWER
SOCKET INPUT
DC POWER
INPUT
GPS
(if fitted)
CCB
PIX 0
EXTERNAL ALARMS
PIX 1
ICS
VENTILATION
GRID
Figure 2-36 Interface panel connector locations