Service Manual

GSM-205-423
Fitting upper cabinet onto stacking bracket
31st Oct 01
Inst. 2–14
Installation & Configuration: Horizon macro indoor
CONTROLLED INTRODUCTION
68P02902W08-B
Fitting upper cabinet onto stacking bracket
Overview of
stacked cabinet
fit
WARNING Do NOT stack more than two Horizon macro indoor
cabinets.
The floor mounted cabinet must be securely bolted to the
floor before a second cabinet is stacked on top.
In multiple cabinet sites, up to two Horizon macro indoor cabinets may be
stacked with another two stacked Horizon
macro indoor cabinets installed
adjacent, to provide the maximum 24 carrier BTS site.
When a second cabinet is stacked above a floor mounted cabinet, the plinth is
used to secure the cabinet to the stacking bracket mounted on the lower cabinet
top panel. The plinth is connected to the cabinet prior to lifting onto the stacking
bracket.
View of eyebolt
positions
Figure 2-9 shows the positions to which eyebolts can be fitted.
EYEBOLT POSITIONS
EYEBOLT POSITIONS
Figure 2-9 Eyebolt positions