Service Manual

GSM-205-423
Installing cabinet plinth
31st Oct 01
Installation & Configuration: Horizon macro indoor
68P02902W08-B
CONTROLLED INTRODUCTION
Inst. 2–7
Installing cabinet plinth
Overview of
foundation and
plinth with
diagram
An indoor cabinet is supplied with a plinth, into which the cabinet structure is
located. This plinth can be used on a smooth, level concrete floor, or other
strong supportive construction. In addition the plinth is used in conjunction with
the stacking bracket in stacked cabinet configurations. The plinth ensures
correct weight distribution, and requires four M12 mounting or anchor bolts to
hold it firmly in position.
WARNING
The cabinet must be bolted to the floor using the supplied
plinth. This prevents danger from toppling, if a stacking
bracket is ever added together with a second cabinet on
top. The plinth also reduces fire hazards. NEVER install
the cabinet without the plinth, and ALWAYS bolt the plinth
to the floor. Ensure the selected bolts are suitable.
The plinth is first fitted to the floor, then the cabinet is slid into the plinth and
bolted to the plinth. Figure 2-3 shows the plinth with locations for both floor
attachment and cabinet attachment.
ig.332.rh
LOCATIONS FOR FLOOR
ATTACHMENT
LOCATIONS FOR
CABINET ATTACHMENT
202
mm
99 mm
80 mm
99 mm
503 mm
Figure 2-3 Plinth for cabinet installation