Service Manual

GSM-205-423
Installation overview
31st Oct 01
Installation & Configuration: Horizon macro indoor
68P02902W08-B
CONTROLLED INTRODUCTION
Inst. 2–1
Installation overview
Introduction to
installation
This chapter provides the information required to install cabinets and their
internal and external interfaces.
CAUTION
Ensure that all site associated equipment is completely
installed before commissioning the cabinet for operation.
NOTE Some site equipment may not be produced by Motorola,
including battery chargers, power supplies, and antennas.
Refer to site-specific documentation and non-Motorola
vendor instructions.
Before starting an installation, ensure the site has been prepared according to
the description summarized in Preparation overview in the Site preparation
chapter, and the site-specific documentation.
WARNING
Do NOT stack more than two Horizon macro indoor
cabinets.
The floor mounted cabinet must be securely bolted to the
floor before a second cabinet is stacked on top.
In multiple cabinet sites, up to two Horizon macro indoor cabinets may be
stacked with another two stacked Horizon
macro indoor cabinets installed
adjacent, to provide the maximum 24 carrier BTS site.