Service Manual
GSM-205-323
NIU
31st Oct 01
Technical Description: Horizon
macro
indoor
68P02902W07-B
CONTROLLED INTRODUCTION
Tech. 6–15
Module view
and LEDs
Figure 6-5 shows an NIU module.
ig.325.rh
RESET/DISABLE
SWITCH
NIU GREEN LED
BACKPLANE
CONNECTOR
NIU RED LED
Figure 6-5 View of NIU module
The NIU status is indicated by the two front panel LEDs, one green and one red,
controlled by the on-board processor, as shown in Table 6-4.
Table 6-4 NIU LED display
Red LED Green LED Status of NIU board
Off Off NIU not powered up or in reset cycle.
Off On Normal operation.
Flashing Flashing NIU undergoing system code download.
On On NIU self testing following switch on or
reboot.
Red LED extinguishes after 20 seconds, or
after 50 seconds following a reboot due to
code download.