Manualshelf

Service Manual

ManualsBrandsNokia Solutions and Networks ManualsElectronicsGSM 1900 Base Transceiver Station
151152153154155156157158159160
GSM-205-323
Blanking plate
31st Oct 01
Tech. 5–34
Technical Description: Horizon
macro
indoor
CONTROLLED INTRODUCTION
68P02902W07-B
Blanking plate
Purpose of
blanking plate
The blanking plate is fitted in locations where a Tx block is not required. The
blanking plate ensures correct air flow through the cabinet.
The plate is attached to the base of the top panel basket using six M4 screws.
NOTE
It is important to ensure that all unused Tx block screw
locations have a screw in place and tightened to correct
torque (see
Technical Description: GSM-205-323
Overview and specifications). This is to ensure
maximum quality of EMC and general containment.
View of
blanking plate
Figure 5-19 shows a view of the blanking plate.
M4 HOLES FOR
ATTACHMENT
Figure 5-19 View of blanking plate