Service Manual

GSM-204-523
Additional replacement parts
31st Oct 01
Maintenance Information: Horizon macro outdoor
68P02902W04-A
CONTROLLED INTRODUCTION
Maint. 3–47
Additional replacement parts
Policy on
non-FRU parts
Non-FRU parts are:
 Items unlikely to fail, but replacement of which is essential if failure occurs.
or
 Subunits of FRUs, where local conditions may make it more economical to
repair the FRU.
CAUTION
Only qualified personnel should attempt non-FRU
replacement, in order to minimize risk of equipment
damage. For example, the CBIA main cage requires care
in removal and installation.
List of non-FRU
parts
Non-FRU parts include the following:
 Door lock.
 Any part of CBIA: main cage, harness, interface panel, backplane.
 The PSU cage.
 The cabinet.
Procedure for
replacing
non-FRU parts
Customers requiring non-FRU replacement should:
1. Contact the local Motorola office for availability.
2. Seek advice from Motorola for fitting non-FRU parts.
CBIA
attachment
screws
The CBIA is attached to the cabinet by screws which should not be loosened:
 Seven M4 screws to the SURF harness (two guide pins lock the cage into
position).
 Four M6 (left side) and five M6 (right side) screws at the cabinet front.
 Eight M6 T30 screws for interface panel attachment to the top panel.