Service Manual

GSM-204-523
Maintenance support procedures
31st Oct 01
Maint. 2–4
Maintenance Information: Horizon macro outdoor
CONTROLLED INTRODUCTION
68P02902W04-A
TMS front cover
removal and
refitting
To remove the TMS front cover:
NOTE
The TMS front cover can only be removed and refitted
when both doors are open.
1. Remove and retain the four push in plastic covers.
2. Using a crosspoint screwdriver, undo the four captive fasteners by turning
anticlockwise until they release.
3. Lift the TMS front cover away from the cabinet and store safely.
To refit the TMS front cover:
1. Refit the TMS front cover and line up the four fasteners.
2. Using a crosspoint screw driver, tighten the four captive fasteners.
3. Refit the four push in plastic covers.