Service Manual

GSM-204-423
Suggested RF configurations
31st Oct 01
Inst. 3–48
Installation & Configuration: Horizon macro outdoor
CONTROLLED INTRODUCTION
68P02902W03-A
Configuration
for single
cabinet sector
1/1/1, 1/1/2, 1/2/2
or 2/2/2
Figure 3-25 shows a suggested configuration, using a single Horizon macro
cabinet, for sector 1/1/1, 1/1/2, 1/2/2 or 2/2/2 with duplexed combining
bandpass filter.
Figure 3-25 Single cabinet sector 1/1/1, 1/1/2, 1/2/2 or 2/2/2 with DCF
Unused SMA connectors must be fitted with 50 ohm terminating loads as shown
below.
If configured for...
Then 50 ohm load required on
unused SMA input to...
Sector 1/1/1 DCF 0, 1 and 2
Sector 1/1/2 DCF 1 and 2
Sector 1/2/2 DCF 2