Service Manual

GSM-204-423
Suggested RF configurations
31st Oct 01
Inst. 3–44
Installation & Configuration: Horizon macro outdoor
CONTROLLED INTRODUCTION
68P02902W03-A
Configuration
for sector 1/1 or
2/2
Figure 3-19 shows a suggested configuration, using a single Horizon macro
cabinet, for sector 1/1 or 2/2 with duplexed combining bandpass filter.
Figure 3-19 Single cabinet sector 1/1 or 2/2 with DCF
Unused SMA connectors must be fitted with 50 ohm terminating loads as shown
below.
If configured for...
Then 50 ohm load required on
unused SMA input to...
sector 1/1 DCF 0 and DCF 2
Configuration
for sector 1/1
Figure 3-20 shows a suggested configuration, using one Horizon macro cabinet,
for sector 1/1 with twin duplexed filter.
Figure 3-20 Single cabinet sector 1/1 with TDF