Service Manual

GSM-204-423
Unpacking and preparing the cabinet
31st Oct 01
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
Inst. 3–11
Visual
inspection
After unpacking and preparation for lifting carry out a visual inspection on:
Cabinet exterior
Examine the exterior of the cabinets for structural, paint or mechanical damage
and report any damage to Motorola.
Cabinet interior
Examine the interior of the cabinet for structural, paint or mechanical damage
and report any damage to Motorola.
The cabinet can now be lifted gently and manoeuvred to the concrete base.
Safe disposal of
packing
material
The packing material used by Motorola is non-returnable, and should be
disposed of safely.
CTU module
allotted slot
retention
CTUs are supplied already fitted into the cabinet, with Tx cable correctly
attached at the factory. The CTUs must remain in the allotted slots for factory
calibrations to be valid.