Service Manual

GSM-204-423
Horizonmacro outdoor tool list
31st Oct 01
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
Inst. 1–3
Horizon macro outdoor tool list
Overview of tool
list
This section lists the recommended tools required for installing, commissioning
and maintaining the Horizon
macro outdoor cabinet.
Tool list
Table 1-1 lists the recommended tools for Horizon macro outdoor.
Table 1-1 Horizon
macro outdoor tool list
Quantity Description
1 pair Safety goggles
1 Hard hat
1 Dust mask
1 pair Ear defenders
1 Antistatic wrist strap with coiled lead
1 Antistatic mat
1 Marker pen
1 Torch
1 Socket set (A/F/Metric 13 mm or 1/2 sq drive)
1 280 mm insulated adjustable spanner
1 each Combination spanners A/F:
1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 7/8, 3/4, 1.
1 each Combination spanners metric: 8 mm to 25 mm
1 Ratchet ring spanner (15 mm x 13 mm)
1 Torque spanner (12 mm)
1 Torque wrench (1–25 Nm)
1 Torx driver set (T10 to T30) and Security Torx driver set (T10 to
T30)
1 6 mm torque spanner (for SMA Tx Block connectors)
1 Security Allen key set
1 Claw hammer
1 Pipe cutter
1 Junior hacksaw
1 300 mm hacksaw
1 pair 150 mm side cutters
1 pair 150 mm heavy duty side cutters