User's Manual Part 2

Abbreviated (All–inclusive) Acceptance Tests – continued

PRELIMINARY

1X SCt4812ET Lite BTS Optimization/ATP

08/01/2001

4-6

Table 4-3: All TX ATP Test Procedure

Step Action

8 Click Save Results or Dismiss.

NOTE

If Dismiss is used, the test results will not be saved in the test report file.

All RX ATP Test

Follow the procedures in Table 4-4 to perform the abbreviated,

all–inclusive receive test.

Table 4-4: All RX ATP Test Procedure

Step Action

1 Set up the test equipment for abbreviated tests per Table 4-1.

2 Select the BBX2s and MCCs to be tested.

3 From the Tests menu, select All RX.

4 Select the appropriate carrier(s) (carrier-bts#-sector#-carrier#) displayed in the Channels/Carrier pick

list.

NOTE

To select multiple items, hold down the Shift or Ctrl key while making the selections.

5 Enter the appropriate channel number in the Carrier n Channels box.

6 Click OK. The status report window is displayed and a Directions pop-up is displayed.

7 Follow the cable connection directions as they are displayed. The test results are displayed in the

status report window.

8 Click Save Results or Dismiss.

NOTE

If Dismiss is used, the test results will not be saved in the test report file.