User's Manual Part 2

RFDS Setup and Calibration – continued

PRELIMINARY

1X SCt4812ET Lite BTS Optimization/ATP

08/01/2001

3-84

Program TSU NAM

Follow the procedure in Table 3-46 to program the TSU NAM. The

NAM must be programmed before it can receive and process test calls,

or be used for any type of RFDS test.

Prerequisites

S MGLI is INS.

S TSU is powered up and has a code load.

Table 3-46: Program NAM Procedure

Step Action

1 Select the RFDS tab.

2 Select the TSU tab.

3 Click on the TSU menu.

4 Click on the Program TSU NAM menu item.

5 Enter the appropriate information in the boxes (see Table 3-40 and Table 3-41) .

6 Click on the OK button to display the status report.

7 Click on the OK button to close the status report window.