User's Manual Part 2

RFDS Setup and Calibration – continued

PRELIMINARY

1X SCt4812ET Lite BTS Optimization/ATP

08/01/2001

3-80

Set Antenna Map Data

The antenna map data must be entered manually if an RFDS is installed.

Antenna map data does not have to be entered if an RFDS is not

installed. The antenna map data is only used for RFDS tests and is

required if a RFDS is installed.

Prerequisite

S Logged into the BTS

Table 3-42: Set Antenna Map Data

Step Action

1 Click on the Util menu.

2 Select Edit > Antenna Map > TX or RX. A data entry pop–up window will appear.

3 Enter/edit values as required for each carrier.

NOTE

Refer to the Util > Edit–antenna map LMF help screen for antenna map examples.

4 Click on the Save button to save displayed values.

5 Click on the Dismiss button to exit the window. Values that were entered/changed after the Save

button was used will not be saved.

NOTE

Entered values will be used by the LMF as soon as they are saved. You do not have to logout and