User's Manual Part 2

FRU Optimization/ATP Test Matrix – continued
08/01/2001
B-3
1X SCt4812ET Lite BTS Optimization/ATP
PRELIMINARY
Table B-3: SC 4812ET Lite BTS Optimization and ATP Test Matrix
Doc
Tbl
#
Description
Directional Coupler (RX)
Directional Coupler (TX)
RX Filter
RX Cables
TX Cables
Multicoupler/Preselector
CIO
SCCP Backplane
BBX2
MCC24/MCC8E
CSM
LFR/HSO
GPS
GLI2
LPA
LPA Filter Bandpass Power Supply Modules (See Note) Switch Card
LPA Combiner Filter 2:1
Table 2-1
Initial Boards/Modules
Install, Preliminary
Operations, CDF Site
Equipage; etc.
D D D D D D D D D D D D D D D D D D D
Table 2-6
Initial Power-up
D D
Table 3-6/
Table 3-7
Start LMF
D D
Table 3-14/
Table 3-15
Download Code
D D D D D
Table 3-17
Enable CSMs
D D
Table 3-20
GPS &HSO Initialization /
Verification
D D D D
Table 3-21
LFR Initialization /
Verification
D D
Table 3-34/
Table 3-35
TX Path Calibration
D D D
Table 3-36
Download Offsets to BBX2
D D
Table 3-37
TX Path Calibration Audit
D D D D D D D D
Table 3-45
RFDS Path Calibration
D D D
D D D D
D D
D D D
Table 4-5
Spectral Purity TX Mask
D D D D D D
Table 4-6
Waveform Quality (rho)
D D D D D D D D
Table 4-7
Pilot Time Offset
D D D D D D D D
Table 4-8
Code Domain Power /
Noise Floor
D D D
Table 4-9
FER Test
D D D D D
NOTE
Replace power supply modules one card at a time so that power to the SCCP shelf is not lost. If power
to the shelf is lost, all cards in the shelf must be downloaded again.
B