User's Manual Part 3

Index – continued
Mar 2001
SCt4812T CDMA BTS Optimization/ATP
DRAFT
Index-5
Installation and Update Procedures, 3-7
Termination and Removal, 5-7
to BTS connection, 3-5
LMF Operation, 3-18
LMF Removal, 5-6
Loading Code, 3-25
Logging In to a BTS, 3-20
Logging Out, 3-22
CLI, 3-23
GUI, 3-22
Logical BTS, 1-13
Numbering, 1-14
Login
CLI, 3-22
GUI, 3-20
Login Failure, Troubleshooting, 6-2
Low Frequency Receiver, 3-33
LPA, test data sheets
convergence, A-8
IM Reduction, A-7
LPA Module LED, 6-26
LPAs, Site Serial Number Check List, A-19
M
Manual
layout, 1-1
overview, 1-2
MASTER LED, GLI2, 6-23
MCC, Enable, 3-31
MGLI2
board detail, MMI port connections, 5-4
Download, 3-26
Miscellaneous errors, Troubleshooting, 6-5
MMI Connection, 3-24
MMI Connector
CSM, 6-22
GLI2, 6-24
MCC, 6-25
MMI equipment setup, 3-24
Model SLN2006A MMI Interface Kit, 1-9
Module status indicators, 6-20
Multi–FER test Failure, Troubleshooting, 6-10
N
NAM, Valid Ranges, 3-79
No DC input voltage to Power Supply Module, 6-18
No DC voltage +5 +65 or +15 Volts to a specific
GLI2 BBX or Switch board, 6-19
No GPS Reference Source, 6-11
Non–MGLI2, Download, 3-28
Null Modem Cable, 3-34
O
Online Help, 1-3
Optimization
Process, 3-1
purpose, 1-4
When, 1-5
Optional Test Equipment, 1-10
frequency counter, 1-10
Oscilloscope, 1-11
P
PA Shelves, 1-20
path
RX, 1-4
TX, 1-4
PCMCIA, Ethernet adapter, LMF to BTS connection,
3-5
Pilot Gain, 4-8, 4-9, 4-10, 4-12
Pilot Offset Acceptance test, 4-9
Pilot Time Offset, 4-5, 4-9
Pin/Signal Information for ARM A Cable, 3-90
Ping, 3-14
PN Offset
programming information, B-1
usage, B-1
PnMask, I and PnMask Q Values, B-2
Power Conversion Shelf (–48 V BTS Only), Site
Serial Number Check List, A-19
Power Delta Calibration
Advantest, I-4
HP8921A, I-2