User's Manual Part 3

Index – continued
DRAFT
SCt4812T CDMA BTS Optimization/ATP
Mar 2001Index-2
BTS frame
DC Distribution Pre–test, 2-9
DC Power Pre–test, 2-7
initial power–up, 2-14
Create CAL File, 3-74
C
C–CCP Backplane, Troubleshooting, 6-13, 6-14
C–CCP Shelf, 1-19
Site Serial Number Check List, A-18
Cable
GPIB, 1-9
LAN Cable, 1-10
Calibrating, 3-45, 3-56, 3-57
Null Modem, 3-34
Setting Loss Values, 3-61
Timimg Reference, 1-9
Cable Calibration
HP8921 with HP PCS
Manual, F-3
CAL File, 3-74
Calculating Center Frequencies
1700 MHz, E-7
1900 MHz, E-2
800 MHz, E-4
Calibrating
Cables, 3-56
RX, 3-59
TX, 3-58
Test Equipment, 3-56
Calibrating Test Cable, Advantest R3465, F-8
Calibration
BLO, 3-63
Cable, 1-6
data file, BLO, 3-65
In–Service, I-13
RF Path, Test Equipment Setup, 3-67
RFDS, 3-82
Test Equipment, 1-6
TX Path, 3-64, 3-68
Test Cable Calibration, 1-6
Test Equipment Calibration, 1-6
Calibration Audit Failure, Troubleshooting, 6-7
Cannot communicate to Communications Analyzer,
6-3
Cannot communicate to Power Meter, 6-2
Cannot download CODE to any device card, 6-4
Cannot Download DATA to any device card, 6-4
Cannot ENABLE device, 6-5
Cannot load BLO, 6-7
Cannot Log into cell–site, 6-2
Cannot perform carrier measurement, 6-9
Cannot perform Code Domain Noise Power
measurement, 6-9
Cannot perform Rho or pilot time offset
measurement, 6-8
Cannot perform Txmask measurement, 6-8
Carrier Measurement Failure, Troubleshooting, 6-9
CDF
site configuration, 3-2
site equipage verification, 3-3
site type and equipage data information, 2-1
CDF Files, Copy from CBSC, 3-8
CDI Alarm
with Alarms Test Box, 3-86
without Alarms Test Box, 3-89
CDMA LMF, Product Description, 1-2
Cell Site
equipage verification, 2-1
preliminary operations, 2-1
types, 3-2
Cell Site Data File. See CDF
Channel elements, No or missing, 6-17
Channels
1700 MHz, E-6
1900 MHz, E-1
800 MHz, E-4
Checksum Failure, 6-11
CIO, Connectors, 6-14
CLI, 1-3, 3-19
Command Line Interface, 3-18
Format Conventions, 3-19
Logging Out, 3-23
Cobra RFDS
external housing, 1-33