User's Manual Part 3

Mar 2001
SCt4812T CDMA BTS Optimization/ATP
DRAFT
Index-1
Index
Numbers
10BaseT/10Base2 Converter, 1-8
LMF to BTS connection, 3-5
1700 MHz Center Frequencies, Calculating, E-7
1700 MHz PCS Channels, E-6
1900 MHz Center Frequencies, Calculating, E-2
1900 MHz PCS Channels, E-1
2–way Splitter, 1-11
3C–PC–COMBO CBL, 1-8
800 MHz CDMA Channels, E-4
800 MHz Center Frequencies, Calculating, E-4
A
ACTIVE LED
GLI2, 6-23
MCC, 6-25
Advantest R3465, 3-43
Calibrating Test Cable, F-8
Alarm Connector Location/Pin Numbering SC
4850/4850E, 3-85
ALARM LED, GLI2, 6-23
Alarm Monitor window, 3-84
Alarm Reporting Display, 3-84
All Cal/Audit Test, 3-72, 3-73
All RX, 4-1
All TX, 4-1
All TX/RX, 4-2
AMR, No control, 6-16
AMR CDI Alarm Input Verification, test data sheets,
A-17
Ancillary Equipment Frame identification, 1-13
Ancillary frame, when to optimize, C-1
Antenna Map, 3-80
ATP, 4-1
Code Domain Power, 4-10
Frame Error Rate (FER), 4-12
generate report, 4-13
Pilot Time Offset, 4-9
Report, 4-13
Spectral Purity Transmit Mask, 4-6
test matrix/detailed optimization, C-2
Test Prerequisites, 4-2
Test Procedure, 4-3
testing options, 4-3
Waveform Quality (rho), 4-8
Automated Acceptance Test Procedure, 4-1
B
Backplane DIP switch settings, 2-3
Bay Level Offset calibration failure, 6-6
BBX
Connector, 6-14
gain set point vs BTS output considerations, D-1
No control in the shelf, 6-16
BLO
Calibration, 3-63
Calibration Audit, 3-70
calibration data file, 3-65
Calibration Failure, 6-6
Download, 3-70
BTS
Ethernet LAN interconnect diagram, 3-14
LMF connection, 3-5
system software download, 3-3
test data sheets, redundancy/alarm tests, A-16
when to optimize, C-1