User's Manual Part 3

Optimization (Pre–ATP) Data Sheets – continued
Mar 2001
A-15
SCt4812T CDMA BTS Optimization/ATP
DRAFT
Table A-13: TX BLO Calibration (6–Sector: 1–Carrier, 2–Carrier Non–adjacent Channels)
OK CommentsSpecificationParameter

BBX–1, ANT–1 = dB
BBX–r, ANT–1 = dB

BBX–2, ANT–2 = dB
BBX–r, ANT–2 = dB

Calibration
0 dB (+0.5 dB) for gain set resolution
BBX–3, ANT–3 = dB
BBX–r, ANT–3 = dB

Audit
carrier 1
post calibration
BBX–4, ANT–4 = dB
BBX–r, ANT–4 = dB

BBX–5, ANT–5 = dB
BBX–r, ANT–5 = dB

BBX–6, ANT–6 = dB
BBX–r, ANT–6 = dB

BBX–7, ANT–1 = dB
BBX–r, ANT–1 = dB

BBX–8, ANT–2 = dB
BBX–r, ANT–2 = dB

Calibration
0 dB (+0.5 dB) for gain set resolution
BBX–9, ANT–3 = dB
BBX–r, ANT–3 = dB

Audit
carrier 2
post calibration
BBX–10, ANT–4 = dB
BBX–r, ANT–4 = dB

BBX–11, ANT–5 = dB
BBX–r, ANT–5 = dB

BBX–12, ANT–6 = dB
BBX–r, ANT–6 = dB
Comments:________________________________________________________
__________________________________________________________________
A