User's Manual Part 3

Optimization (Pre–ATP) Data Sheets – continued
DRAFT
SCt4812T CDMA BTS Optimization/ATP
Mar 2001
A-14
TX Bay Level Offset/Power
Output Verification for
6–Sector Configurations
1–Carrier
2–Carrier Non–adjacent Channels
Table A-13: TX BLO Calibration (6–Sector: 1–Carrier, 2–Carrier Non–adjacent Channels)
OK Parameter Specification Comments

BBX–1, ANT–1 = dB
BBX–r, ANT–1 = dB

BBX–2, ANT–2 = dB
BBX–r, ANT–2 = dB

Calibrate TX Bay Level Offset = 42 dB (typical),
BBX–3, ANT–3 = dB
BBX–r, ANT–3 = dB

carrier 1 38 dB (minimum) prior to calibration
BBX–4, ANT–4 = dB
BBX–r, ANT–4 = dB

BBX–5, ANT–5 = dB
BBX–r, ANT–5 = dB

BBX–6, ANT–6 = dB
BBX–r, ANT–6 = dB

BBX–7, ANT–1 = dB
BBX–r, ANT–1 = dB

BBX–8, ANT–2 = dB
BBX–r, ANT–2 = dB

Calibrate TX Bay Level Offset = 42 dB (typical),
BBX–9, ANT–3 = dB
BBX–r, ANT–3 = dB

carrier 2 38 dB (minimum) prior to calibration
BBX–10, ANT–4 = dB
BBX–3, ANT–4 = dB

BBX–11, ANT–5 = dB
BBX–r, ANT–5 = dB

BBX–12, ANT–6 = dB
BBX–r, ANT–5 = dB
. . . continued on next page
A