User's Manual Part 3

Optimization (Pre–ATP) Data Sheets – continued
DRAFT
SCt4812T CDMA BTS Optimization/ATP
Mar 2001
A-12
3–Carrier Adjacent Channels
4–Carrier Adjacent Channels
Table A-12: TX Bay Level Offset Calibration (3–Sector: 3 or 4–Carrier Adjacent Channels)
OK Parameter Specification Comments

BBX–1, ANT–1 = dB
BBX–r, ANT–1 = dB

Calibrate
carrier 1
TX Bay Level Offset = 42 dB (+4 dB)
prior to calibration
BBX–2, ANT–2 = dB
BBX–r, ANT–2 = dB

BBX–3, ANT–3 = dB
BBX–r, ANT–3 = dB

BBX–7, ANT–1 = dB
BBX–r, ANT–1 = dB

Calibrate
carrier 2
TX Bay Level Offset = 42 dB (+4 dB)
prior to calibration
BBX–8, ANT–2 = dB
BBX–r, ANT–2 = dB

BBX–9, ANT–3 = dB
BBX–r, ANT–3 = dB

BBX–4, ANT–4 = dB
BBX–r, ANT–4 = dB

Calibrate
carrier 3
TX Bay Level Offset = 42 dB (+4 dB)
prior to calibration
BBX–5, ANT–5 = dB
BBX–r, ANT–5 = dB

BBX–6, ANT–6 = dB
BBX–r, ANT–6 = dB

BBX–10, ANT–4 = dB
BBX–3, ANT–4 = dB

Calibrate
carrier 4
TX Bay Level Offset = 42 dB (+4 dB)
prior to calibration
BBX–11, ANT–5 = dB
BBX–r, ANT–5 = dB

BBX–12, ANT–6 = dB
BBX–r, ANT–6 = dB

BBX–1, ANT–1 = dB
BBX–r, ANT–1 = dB

Calibration
Audit
carrier 1
0 dB (+0.5 dB) for gain set resolution
post calibration
BBX–2, ANT–2 = dB
BBX–r, ANT–2 = dB

carrier 1
BBX–3, ANT–3 = dB
BBX–r, ANT–3 = dB
. . . continued on next page
A