User's Manual Part 3

Optimization (Pre–ATP) Data Sheets – continued
Mar 2001
A-9
SCt4812T CDMA BTS Optimization/ATP
DRAFT
TX Bay Level Offset/Power
Output Verification for
3–Sector Configurations
1–Carrier
2–Carrier Non–adjacent Channels
4–Carrier Non–adjacent Channels
Table A-10: TX BLO Calibration (3–Sector: 1–Carrier, 2–Carrier and 4–Carrier Non–adjacent Channels)
OK Parameter Specification Comments

BBX–1, ANT–1 = dB
BBX–r, ANT–1 = dB

Calibrate
carrier 1
TX Bay Level Offset = 42 dB (+4 dB)
prior to calibration
BBX–2, ANT–2 = dB
BBX–r, ANT–2 = dB

BBX–3, ANT–3 = dB
BBX–r, ANT–3 = dB

BBX–7, ANT–1 = dB
BBX–r, ANT–1 = dB

Calibrate
carrier 2
TX Bay Level Offset = 42 dB (+4 dB)
prior to calibration
BBX–8, ANT–2 = dB
BBX–r, ANT–2 = dB

BBX–9, ANT–3 = dB
BBX–r, ANT–3 = dB

BBX–4, ANT–1 = dB
BBX–r, ANT–1 = dB

Calibrate
carrier 3
TX Bay Level Offset = 42 dB (+4 dB)
prior to calibration
BBX–5, ANT–2 = dB
BBX–r, ANT–2 = dB

BBX–6, ANT–3 = dB
BBX–r, ANT–3 = dB

BBX–10, ANT–1 = dB
BBX–r, ANT–1 = dB

Calibrate
carrier 4
TX Bay Level Offset = 42 dB (+4 dB)
prior to calibration
BBX–11, ANT–2 = dB
BBX–r, ANT–2 = dB

BBX–12, ANT–3 = dB
BBX–r, ANT–3 = dB
. . . continued on next page
A