User's Manual Part 3

Prepare to Leave the Site – continued
DRAFT
SCt4812T CDMA BTS Optimization/ATP
Mar 2001
5-8
LMF Removal
DO NOT power down the LMF without performing the
procedure indicated below. Corrupted/lost data files may
result, and in some cases, the LMF may lock up.
CAUTION
Follow the procedure in Table 5-7 to terminate the LMF session and
remove the terminal.
Table 5-7: LMF Termination and Removal
 Step Action
1 From the CDMA window select File>Exit.
2 From the Windows Task Bar click Start>Shutdown.
Click Yes when the Shut Down Windows message appears.
3 Disconnect the LMF terminal Ethernet connector from the BTS cabinet.
4 Disconnect the LMF serial port, the RS-232 to GPIB interface box, and the GPIB cables as
required for equipment transport.
Copying CAL Files from Diskette to the CBSC
Follow the procedure in Table 5-8 to copy CAL files from a diskette to
the CBSC.
Table 5-8: Procedures to Copy CAL Files from Diskette to the CBSC
 Step Action
1 Login to the CBSC on the workstation using your account name and password.
NOTE
Enter the information that appears in bold text.
2 Place your diskette containing CAL file(s) in the CBSC workstation diskette drive.
3 Type eject –q and press the <Enter> key.
4 Type mount and press the <Enter> key.
Verify that floppy/no_name is displayed.
NOTE
If the eject command has been previously entered, floppy/no_name will be appended with a
number
. Use the explicit floppy/no_name reference displayed.
5 Enter cd /floppy/no_name and press the <Enter> key.
6 Enter ls –lia and press the <Enter> key.
Verify that the bts–#.cal file is on the diskette.
7 Enter cd and press the <Enter> key.
. . . continued on next page
5