User's Manual

Introduction
– continued
SC
TM
4812ET RF and Power Cabinet Hardware Installation Manual
DRAFT
Apr 2001
V02.03
20
Recommended Tools
Table 1-3 lists tools recommended for installing RF and Power Cabinets.
Table 1-3: Recommended Tools
Item Tool Description
1 Tin Snips
2 Wire Brush
3 Knife or Scissors
4 10 mm Nut Driver
5 19 mm (3/4”) Open ended Torque Wrench (for N–type
connector)
6 110 Style Punch Block Termination Tool
7 Thomas & Betts TBM14 Hydraulic crimping tool with color
keyed crimp die set (or equivalent)
8 Drill Motor
9 18 mm (11/16”) Masonry Drill Bit
10 Ratchet Handle with 19 mm (3/4”) Socket (Deep Socket or
Ratchet Extension required).
11 Torque Driver (Torque Range: 5–135 N–m [4–100 ft–lbs])
with 19 mm (3/4”) and 10 mm Socket
12 Torque wrench for SMA’s Mountz Inc. MTBN2 (Part number
020314) with 5/16” open end head (Part number 020402).
13 Copper–based Conductive Grease (Berndy “Penetrox” or
equivalent).
1