User's Manual

Introduction

– continued

4812ET RF and Power Cabinet Hardware Installation Manual

DRAFT

Apr 2001

V02.03

Installation Hardware

Table 1-2 shows the quantity and description of the installation hardware

that is shipped with the RF Cabinet and with the Power Cabinet.

Figure 1-1 is a template guide for identifying the parts.

Table 1-2: Installation Hardware Supplied with Cabinets

RF Power Description

1 1 7/16” Hex Tool

1 1 ESD Wrist Strap

4 4 Cabinet Mounting Brackets

8 8 M12 x 30 Bolts (for Mounting Brackets)

4 4 Insulating Shoulder Washer (for Mounting Bolts)

4 4 5/8” Bolts (to replace eye bolts)

1 1 Compression Lug (for #2 AWG Ground Wire)

2 2 M6 Stainless Steel Locking Hex Nuts (for Ground Lug)

4 4 M12 x 100 Bolt

4 16 M12 Flat Washer

4 4 M12 Lock Washer

4 4 M12 Nut

1 1 Motorola Ivory Touch–Up Paint

2 2 M6 Flat Washer

6 6 M10 Nut

6 6 M10 Flat Washer

6 6 M10 Lock Washer

4 4 5/8” Flat Washer

4 4 Large Flat Washer

1 – Weatherseal Bushing and Nut for RGPS Cable

1 – MMI Cable

– 12 Battery Terminal Straps

– 3 #2/0 AWG INS WELD Cable (Red)

– 3 #2/0 AWG INS WELD Cable (Black)

– 12 90° Compression Lug (for #2/0 AWG DC Cable)

– 1 Twisted Pair Cable (for Power Cabinet Alarms to RF Cabinet)