User's Manual

SC 4812ET to SC 4812ET DC Power Sharing and Frame Installation
– continued
DRAFT
SC
TM
4812ET RF and Power Cabinet Hardware Installation Manual
Apr 2001
V0F.02
172
Table F-2: Wire, Lug, and Die Table
Wire Size
Motorola Part Number
for Lugs
AWG Metric (mm)
Welding
(Superflex)
Circular
Mills Area
Color and Die
Code
CGDS256306951514 2/0 AWG 60–70 1/0 133,400 BLACK 45
CGDS256306951539 3/0 AWG 85–95 2/0 167,800 ORANGE 50
CGDS256306951515 4/0 AWG 100–107 3/0 211,600 PURPLE 54
CGDS256306951540 N/A N/A 4/0 250,000 YELLOW 62
Power input connections
Figure F-2 shows how the power cable is connected to the RF and Power
Cabinet. Figure 5-1 show the location of the DC power connector in the
RF Cabinet and Power Cabinet.
Figure F-2: Connecting Power Cables
CABLE
GROMMET
LUG COVER
M10 NUT (17 mm Hex
Driver Required)
M10 LOCK WASHER
M10 FLAT WASHER
CRIMP LUG
FEED COVER
(Do not remove)
ENCLOSURE
BASE
POWER
INPUT
STUD
Route the cables through the rubber boot BEFORE
crimping lug onto wire or damage to the boot can occur.
CAUTION
F